2.8. CentOS¶
This section describes how to install Mroonga related RPM packages on
CentOS. You can install them by yum.
We distribute both 32-bit and 64-bit packages but we strongly recommend a 64-bit package for server. You should use a 32-bit package just only for tests or development. You will encounter an out of memory error with a 32-bit package even if you just process medium size data.
2.8.1. CentOS 7 (with the Oracle MySQL 5.7 package)¶
You can use Oracle’s MySQL packages version 5.7 on CentOS 7 since Mroonga 5.09 release.
Install:
% sudo yum install -y https://packages.groonga.org/centos/groonga-release-latest.noarch.rpm
% sudo yum install -y https://repo.mysql.com/mysql80-community-release-el7-5.noarch.rpm
% sudo yum install -y yum-utils
% sudo yum-config-manager --disable mysql80-community
% sudo yum-config-manager --enable mysql57-community
% sudo yum install -y --enablerepo=epel mysql-community-5.7-mroonga
(% sudo systemctl start mysqld)
(% tmp_password=$(sudo grep 'A temporary password' /var/log/mysqld.log | sed -e 's/^.*: //'))
(% mysql -u root --password="${tmp_password}" --connect-expired-password -e "ALTER USER user() IDENTIFIED BY '$tmp_password'")
(% sudo mysqladmin -u root --password="${tmp_password}" password)
If you want to use MeCab as a tokenizer, install groonga-tokenizer-mecab package.
Install groonga-tokenizer-mecab package:
% sudo yum install -y --enablerepo=epel groonga-tokenizer-mecab
2.8.2. CentOS 7 (with the Oracle MySQL 8.0 package)¶
You can use Oracle’s MySQL packages version 8.0 on CentOS 7 since Mroonga 9.04 release.
Note
There are already known issues about MySQL 8.0.
Wrapper mode Wrapper mode is not supported yet
Storage mode JSON data type is not supported yet
Install:
% sudo yum install -y https://packages.groonga.org/centos/groonga-release-latest.noarch.rpm
% sudo yum install -y https://repo.mysql.com/mysql80-community-release-el7.rpm
% sudo yum install -y --enablerepo=epel mysql-community-8.0-mroonga
(% sudo systemctl start mysqld)
(% tmp_password=$(sudo grep 'A temporary password' /var/log/mysqld.log | sed -e 's/^.*: //'))
(% sudo mysqladmin -u root --password="${tmp_password}" password)
If you want to use MeCab as a tokenizer, install groonga-tokenizer-mecab package.
Install groonga-tokenizer-mecab package:
% sudo yum install -y --enablerepo=epel groonga-tokenizer-mecab
2.8.3. CentOS 7 (with Percona Server 5.7 package)¶
You can use Percona Server packages version 5.7 on CentOS 7 since Mroonga 6.02 release.
Install:
% sudo yum install -y https://packages.groonga.org/centos/groonga-release-latest.noarch.rpm
% sudo yum install -y https://repo.percona.com/yum/percona-release-latest.noarch.rpm
% sudo yum install -y --enablerepo=epel percona-server-5.7-mroonga
(% sudo systemctl start mysqld)
(% tmp_password=$(sudo grep 'A temporary password' /var/log/mysqld.log | sed -e 's/^.*: //'))
(% sudo mysqladmin -u root --password="${tmp_password}" password)
If you want to use MeCab as a tokenizer, install groonga-tokenizer-mecab package.
Install groonga-tokenizer-mecab package:
% sudo yum install -y --enablerepo=epel groonga-tokenizer-mecab
2.8.4. CentOS 7 (with Percona Server 8.0 package)¶
You can use Percona Server packages version 8.0 on CentOS 7 since Mroonga 10.06 release.
Install:
% sudo yum install -y https://packages.groonga.org/centos/groonga-release-latest.noarch.rpm
% sudo yum install -y https://repo.percona.com/yum/percona-release-latest.noarch.rpm
% sudo percona-release setup ps80
% sudo yum install -y --enablerepo=epel percona-server-8.0-mroonga
(% sudo systemctl start mysqld)
(% tmp_password=$(sudo grep 'A temporary password' /var/log/mysqld.log | sed -e 's/^.*: //'))
(% sudo mysqladmin -u root --password="${tmp_password}" password)
If you want to use MeCab as a tokenizer, install groonga-tokenizer-mecab package.
Install groonga-tokenizer-mecab package:
% sudo yum install -y --enablerepo=epel groonga-tokenizer-mecab
2.8.5. CentOS 7 (with MariaDB 10.4 package)¶
You can use MariaDB’s MariaDB packages version 10.4 on CentOS 7 since Mroonga 9.07 release.
Create /etc/yum.repos.d/MariaDB.repo with the following content:
[mariadb]
name = MariaDB
baseurl = http://yum.mariadb.org/10.4/centos7-amd64
gpgkey=https://yum.mariadb.org/RPM-GPG-KEY-MariaDB
gpgcheck=1
Install:
% sudo yum install -y https://packages.groonga.org/centos/groonga-release-latest.noarch.rpm
% sudo yum install -y MariaDB-server
% sudo systemctl start mariadb
% sudo yum install -y --enablerepo=epel mariadb-10.4-mroonga
(% sudo mysqladmin -u root password 'new-password')
If you want to use MeCab as a tokenizer, install groonga-tokenizer-mecab package.
Install groonga-tokenizer-mecab package:
% sudo yum install -y --enablerepo=epel groonga-tokenizer-mecab
2.8.6. CentOS 7 (with MariaDB 10.5 package)¶
You can use MariaDB’s MariaDB packages version 10.5 on CentOS 7 since Mroonga 10.06 release.
Create /etc/yum.repos.d/MariaDB.repo with the following content:
[mariadb]
name = MariaDB
baseurl = http://yum.mariadb.org/10.5/centos7-amd64
gpgkey=https://yum.mariadb.org/RPM-GPG-KEY-MariaDB
gpgcheck=1
Install:
% sudo yum install -y https://packages.groonga.org/centos/groonga-release-latest.noarch.rpm
% sudo yum install -y MariaDB-server
% sudo systemctl start mariadb
% sudo yum install -y --enablerepo=epel mariadb-10.5-mroonga
(% sudo mysqladmin -u root password 'new-password')
If you want to use MeCab as a tokenizer, install groonga-tokenizer-mecab package.
Install groonga-tokenizer-mecab package:
% sudo yum install -y --enablerepo=epel groonga-tokenizer-mecab
2.8.7. CentOS 7 (with MariaDB 10.6 package)¶
You can use MariaDB’s MariaDB packages version 10.6 on CentOS 7 since Mroonga 11.09 release.
Create /etc/yum.repos.d/MariaDB.repo with the following content:
[mariadb]
name = MariaDB
baseurl = https://yum.mariadb.org/10.6/centos7-amd64
gpgkey=https://yum.mariadb.org/RPM-GPG-KEY-MariaDB
gpgcheck=1
Install:
% sudo yum install -y https://packages.groonga.org/centos/groonga-release-latest.noarch.rpm
% sudo yum install -y MariaDB-server
% sudo systemctl start mariadb
% sudo yum install -y --enablerepo=epel mariadb-10.6-mroonga
(% sudo mysqladmin -u root password 'new-password')
If you want to use MeCab as a tokenizer, install groonga-tokenizer-mecab package.
Install groonga-tokenizer-mecab package:
% sudo yum install -y --enablerepo=epel groonga-tokenizer-mecab
2.8.8. CentOS 7 (with MariaDB 10.7 package)¶
You can use MariaDB’s MariaDB packages version 10.7 on CentOS 7 since Mroonga 12.02 release.
Create /etc/yum.repos.d/MariaDB.repo with the following content:
[mariadb]
name = MariaDB
baseurl = https://yum.mariadb.org/10.7/centos7-amd64
gpgkey=https://yum.mariadb.org/RPM-GPG-KEY-MariaDB
gpgcheck=1
Install:
% sudo yum install -y https://packages.groonga.org/centos/groonga-release-latest.noarch.rpm
% sudo yum install -y MariaDB-server
% sudo systemctl start mariadb
% sudo yum install -y --enablerepo=epel mariadb-10.7-mroonga
(% sudo mysqladmin -u root password 'new-password')
If you want to use MeCab as a tokenizer, install groonga-tokenizer-mecab package.
Install groonga-tokenizer-mecab package:
% sudo yum install -y --enablerepo=epel groonga-tokenizer-mecab
2.8.9. CentOS 7 (with MariaDB 10.8 package)¶
You can use MariaDB’s MariaDB packages version 10.8 on CentOS 7 since Mroonga 12.06 release.
Create /etc/yum.repos.d/MariaDB.repo with the following content:
[mariadb]
name = MariaDB
baseurl = https://yum.mariadb.org/10.8/centos7-amd64
gpgkey=https://yum.mariadb.org/RPM-GPG-KEY-MariaDB
gpgcheck=1
Install:
% sudo yum install -y https://packages.groonga.org/centos/groonga-release-latest.noarch.rpm
% sudo yum install -y MariaDB-server
% sudo systemctl start mariadb
% sudo yum install -y --enablerepo=epel mariadb-10.8-mroonga
(% sudo mysqladmin -u root password 'new-password')
If you want to use MeCab as a tokenizer, install groonga-tokenizer-mecab package.
Install groonga-tokenizer-mecab package:
% sudo yum install -y --enablerepo=epel groonga-tokenizer-mecab
2.8.10. CentOS 7 (with MariaDB 10.9 package)¶
You can use MariaDB’s MariaDB packages version 10.9 on CentOS 7 since Mroonga 12.09 release.
Create /etc/yum.repos.d/MariaDB.repo with the following content:
[mariadb]
name = MariaDB
baseurl = https://yum.mariadb.org/10.9/centos7-amd64
gpgkey=https://yum.mariadb.org/RPM-GPG-KEY-MariaDB
gpgcheck=1
Install:
% sudo yum install -y https://packages.groonga.org/centos/groonga-release-latest.noarch.rpm
% sudo yum install -y MariaDB-server
% sudo systemctl start mariadb
% sudo yum install -y --enablerepo=epel mariadb-10.9-mroonga
(% sudo mysqladmin -u root password 'new-password')
If you want to use MeCab as a tokenizer, install groonga-tokenizer-mecab package.
Install groonga-tokenizer-mecab package:
% sudo yum install -y --enablerepo=epel groonga-tokenizer-mecab
2.8.11. CentOS 7 (with MariaDB 10.10 package)¶
You can use MariaDB’s MariaDB packages version 10.10 on CentOS 7 since Mroonga 12.11 release.
Create /etc/yum.repos.d/MariaDB.repo with the following content:
[mariadb]
name = MariaDB
baseurl = https://yum.mariadb.org/10.10/centos7-amd64
gpgkey=https://yum.mariadb.org/RPM-GPG-KEY-MariaDB
gpgcheck=1
Install:
% sudo yum install -y https://packages.groonga.org/centos/groonga-release-latest.noarch.rpm
% sudo yum install -y MariaDB-server
% sudo systemctl start mariadb
% sudo yum install -y --enablerepo=epel mariadb-10.10-mroonga
(% sudo mysqladmin -u root password 'new-password')
If you want to use MeCab as a tokenizer, install groonga-tokenizer-mecab package.
Install groonga-tokenizer-mecab package:
% sudo yum install -y --enablerepo=epel groonga-tokenizer-mecab